新交互逻辑，长按/短按

takway/audio_utils.py

@@ -396,7 +396,7 @@ except:
     webrtcvad_available = False
 
 class VADRecorder(HDRecorder):
-    def __init__(self, vad_sensitivity=0, frame_duration=30, vad_buffer_size=7, min_act_time=1,**kwargs):
+    def __init__(self, vad_sensitivity=0, frame_duration=30, vad_buffer_size=7, min_act_time=0.3,**kwargs):
         super().__init__(**kwargs)
         if webrtcvad_available:
             self.vad = webrtcvad.Vad(vad_sensitivity)

takway/board/keyboard.py

@@ -12,7 +12,7 @@ class Keyboard(BaseHardware):
         
         self.keyboard_key = keyboard_key
         self.init_hd_thread()
-        self.power_status = False # 单次触发按键状态
+        self.long_power_status = False # 单次触发按键状态
         
     def hd_detection_loop(self):
         keyboard_status = False
@@ -27,10 +27,12 @@ class Keyboard(BaseHardware):
             time.sleep(0.001)
             
             if not self.shared_hd_status and last_status:
-                self.power_status = ~self.power_status
+                self.long_power_status = ~self.long_power_status
-                if self.power_status:
+                if self.long_power_status:
                     print("Chating mode.")
                 else:
                     print("Slience mode.")
                 print(f"pres time: {datetime.datetime.now()}")
             last_status = self.shared_hd_status
+            
+    

takway/board/orangepi.py

@@ -7,7 +7,6 @@ try:
 except:
     pass
 
-
 '''
 | GPIO | LED |
 |  --  | - - |
@@ -17,7 +16,7 @@ except:
 | 3 | 蓝色 |
 | 4 | 白色 |
 
-| GPIO | BUTTOM |
+| GPIO | BUTTON |
 |  --  |  ----  |
 | 6 | 按键1 |
 | 8 | 按键2 |
@@ -40,6 +39,8 @@ class OrangePi(BaseHardware):
         self.led_set_status_2 = False
         
         self.power_status = False # 单次触发按键状态
+        self.long_power_status = False
+        self.short_power_status = False
 
         self.button_init()
         self.init_hd_thread()
@@ -57,30 +58,43 @@ class OrangePi(BaseHardware):
         wiringpi.pinMode(self.BUTTON_PIN_2, GPIO.INPUT)
         
     def init_hd_thread(self):
-        # hd_threads = [threading.Thread(target=self.hd_detection_loop), 
-        #               threading.Thread(target=self.hd_detection_loop_2)]
         hd_threads = [threading.Thread(target=self.hd_detection_loop)]
         for hd_thread in hd_threads:
             hd_thread.start()
     
     def hd_detection_loop(self):
-        keyboard_status = False
+        last_status_1 = False
-        last_status = False
+        press_time_1 = None
-        while True:
-            self.button_status = wiringpi.digitalRead(self.BUTTON_PIN_1)
-            if self.button_status:
-                wiringpi.digitalWrite(self.LED_PIN_red, GPIO.LOW)
-            else:
-                wiringpi.digitalWrite(self.LED_PIN_red,GPIO.HIGH)
         
-            if not self.button_status and last_status:
+        while True:
-                self.power_status = ~self.power_status
+            button_status_1 = wiringpi.digitalRead(self.BUTTON_PIN_1)
-                if self.power_status:
+            if not button_status_1 and last_status_1:
-                    print("Chating mode.")
+                press_time_1 = datetime.datetime.now()
+            elif button_status_1 and not last_status_1:
+                if press_time_1:
+                    press_duration = (datetime.datetime.now() - press_time_1).total_seconds()
+                    print(f"press_duration: {press_duration}")
+                    if press_duration > 1:
+                        self.long_power_status =  ~self.long_power_status
+                        print(f"long_power_status: {self.long_power_status}")
                     else:
-                    print("Slience mode.")
+                        self.short_power_status = ~self.short_power_status
-                print(f"pres time: {datetime.datetime.now()}")
+                        print(f"short_power_status: {self.short_power_status}")
-            last_status = self.button_status
+                press_time_1 = None
+                
+            last_status_1 = button_status_1
+            
+            # 更新LED状态
+            if self.long_power_status:
+                self.set_led_on('white')
+            else:
+                self.short_power_status = False
+                self.set_led_off('white')
+            
+            if self.short_power_status:
+                self.set_led_on('yellow')
+            else:
+                self.set_led_off('yellow')
     
     def set_led_on(self, color='red'):
         wiringpi.digitalWrite(getattr(self, f'LED_PIN_{color}'), GPIO.HIGH)

takway/clients/client_utils.py

@@ -117,6 +117,12 @@ class BaseWebSocketClient:
         '''
         self.websocket = create_connection(self.server_url)
         
+    def close_client(self):
+        '''
+        Close the client.
+        '''
+        self.websocket.close()
+    
     def send_per_data(self, 
         text: str = '',
         audio: bytes = b'',

takway/clients/web_socket_client_utils.py

@@ -39,7 +39,7 @@ class WebSocketClinet:
         self.board = board
         # server_args
         self.server_args = server_args
-        # recorder_args
+        # self.recorder_args
         self.recorder_args = recorder_args
         # player_args
         self.player_args = player_args
@@ -57,9 +57,15 @@ class WebSocketClinet:
         self.audio_play_queue = manager.Queue()
         self.excute_queue = manager.Queue()
         
-        # 多进程标志为
+        # 唤醒事件
-        self.mircophone_active_set = manager.Event()
+        self.wakeup_event = manager.Event()
-        self.speaker_active_set = manager.Event()
+        # 打断事件
+        self.interrupt_event = manager.Event()
+        
+        # 监听事件
+        self.listening_event = manager.Event()
+        # 播放事件
+        self.speaking_event = manager.Event()
                 
         processes = [
             multiprocessing.Process(target=self.audio_process),
@@ -73,6 +79,7 @@ class WebSocketClinet:
         
         for process in processes:
             time.sleep(0.5)
+            # time.sleep(2)
             process.start()
         for process in processes:
             process.join()
@@ -89,6 +96,7 @@ class WebSocketClinet:
         # TODO: 
         press_type = self.recorder_args.pop('press_type')
         max_slience_time = self.recorder_args.pop('max_slience_time')
+        board = self.recorder_args.pop('board', None)
         if voice_trigger:
             recorder = PicovoiceRecorder(**self.recorder_args)
         else:
@@ -100,14 +108,73 @@ class WebSocketClinet:
         # TODO:
         recorder.press_type = press_type
         recorder.max_slience_time = max_slience_time
+        recorder.board = board
+        
+        # self.hardware = recorder.hardware
+        # self.long_power_status = recorder.hardware.long_power_status
+        
+        print(f"recorder.min_act_time: {recorder.min_act_time}")
+        print(f"recorder.max_slience_time: {recorder.max_slience_time}")
         
         print("Audio Process started.")
         
-        print("Waiting for wake up...")
+        # create threads
-        # recorder.hardware.set_led_on("green")
+        threads = [threading.Thread(target=self.hardware_trigger_thread, args=(recorder,))]
+        if voice_trigger:
+            vioce_threads = [
+                threading.Thread(target=self.voice_trigger_thread, args=(recorder,)),
+            ]
+            threads.extend(vioce_threads)
+        for thread in threads:
+            thread.start()
+        print("Audio Process started.")
+        
+        while True:
+            for thread in threads:
+                thread.join()
+            print(f"audio process exit") ; exit()
+        
+        
+    def hardware_trigger_thread(self, recorder):
+        """hardware_trigger_thread
+        
+        Args: 
+            recorder: takway.audio_utils.Recorder, recorder object
+        """
+        print("Hardware trigger thread started.")
+        last_short_power_status = False
+        while True:
+            # 开关按键被按下
+            if recorder.hardware.long_power_status:
+                if not self.wakeup_event.is_set():
+                    self.wakeup_event.set()
+                # 短时按键被按下，打断
+                try:
+                    if recorder.hardware.short_power_status and not last_short_power_status:
+                        self.interrupt_event.set()
+                        recorder.hardware.short_power_status = False
+                        print("Interrupt conversation.")
+                        last_short_power_status = ~recorder.hardware.short_power_status
+                    else:
+                        last_short_power_status = recorder.hardware.short_power_status
+                        
+                except:
+                    pass
+            else:
+                self.wakeup_event.clear()
+            time.sleep(0.1)
+        
+    def voice_trigger_thread(self, recorder):
+        """voice_trigger_thread
+        
+        Args: 
+            recorder: takway.audio_utils.Recorder, recorder object
+        """
+        board = recorder.board
+        print("Waiting for wake up...")
+        if board == 'orangepi':
+            recorder.hardware.set_led_on("green")
         while True:
-            if self.shared_waiting:
-                continue
             data = recorder.record_chunk_voice(
                 CHUNK=recorder.porcupine.frame_length, 
                 return_type=None, 
@@ -116,12 +183,25 @@ class WebSocketClinet:
             
             record_chunk_size = recorder.vad_chunk_size
             
+            
             # 开关按键被按下或被关键词唤醒
-            if recorder.hardware.power_status or recorder.is_wakeup(data):
+            if self.wakeup_event.is_set():
-                # recorder.hardware.set_led_on("blue")
+                print(f"{datetime.now()}: Wake up by button.")
-                pass
+            else:
+                if recorder.is_wakeup(data):
+                    self.wakeup_event.set()
+                    recorder.hardware.long_power_status = True
+                    print(f"{datetime.now()}: wake up by voice.")
                 else:
                     continue
+            
+            # 设置为倾听模式
+            self.listening_event.set()
+            self.speaking_event.clear()
+            
+            if board == 'orangepi':
+                recorder.hardware.set_led_on("blue")
+                
             # wake up
             is_bgn = True
             is_end = False
@@ -132,6 +212,10 @@ class WebSocketClinet:
             print("Start recording...")
             # 准备对话状态
             while True:
+                if not self.wakeup_event.is_set():
+                    break
+                
+                if self.listening_event.is_set():
                     # 语音活动检测
                     data = recorder.record_chunk_voice(
                         CHUNK=record_chunk_size, 
@@ -141,14 +225,15 @@ class WebSocketClinet:
                     
                     # 判断状态
                     if is_speech:
-                    print("valid voice")
+                        print(f"{datetime.now()}: valid voice")
                         slience_bgn_t = time.time()
                         frames.append(data)
-                else:
+
                     slience_time = time.time() - slience_bgn_t
 
                     # 长时沉默关闭唤醒状态：如果唤醒后超过一定时间没有说话/关闭按键被按下，则认为是结束
-                if slience_time > recorder.max_slience_time or not recorder.hardware.power_status:
+                    if slience_time > recorder.max_slience_time:
+                        recorder.hardware.long_power_status = False
                         break
                     
                     # 短时沉默结束单次对话：沉默时间超过一定时间段（0.5s左右），则发送数据
@@ -156,8 +241,8 @@ class WebSocketClinet:
                         is_end = True
                         is_bgn = False
                         
-                if not is_speech:
+                        print(f"{datetime.now()}: slience_time: {slience_time}")
-                    continue
+
                     
                     # 流式发送数据
                     stream_reset_status = self.stream_record_process(
@@ -175,8 +260,11 @@ class WebSocketClinet:
                     
                             # print(f"Tatal frames: {_total_frames*record_chunk_size}, valid frame: {_frames*record_chunk_size}, valid RATE: {_frames/_total_frames*100:.2f}%, {_frames*record_chunk_size/recorder.RATE} sec.")
                             # print("End recording.")
-                # recorder.hardware.set_led_off("blue")
+                    if board == 'orangepi':
-    
+                        recorder.hardware.set_led_off("blue")
+                elif self.speaking_event.is_set():
+                    print(f"{datetime.now()}: wait for speaking.")
+                    self.listening_event.wait()
     
     def stream_record_process(self, 
                             bytes_frames: bytes, 
@@ -225,13 +313,29 @@ class WebSocketClinet:
         while True:
             if self.client_queue.empty():
                 continue
-            
+            print(f"web socket: {self.wakeup_event.is_set()}, {self.interrupt_event.is_set()}, {self.listening_event.is_set()}")
-            # print(f"init skt time: {datetime.now()}")
+            print(f"{datetime.now()}: start setup web socket connection.")
             # 唤醒
+            if self.wakeup_event.is_set() and not self.interrupt_event.is_set():
                 client.wakeup_client()
+                clear_queue_flag = False
+            else:
+                print(f"not wake up, skip setup web socket connection.")
+                self.client_queue.get(block=False)
+                continue
             
             # 发送数据
             for queue_data in QueueIterator(self.client_queue):
+                
+                # 当唤醒状态被关闭时，退出循环; 当被打断时，退出循环
+                if not self.wakeup_event.is_set() or self.interrupt_event.is_set():
+                    clear_queue_flag = True
+                    
+                if clear_queue_flag:
+                    client.close_client()
+                    break
+                
+                # 发送音频数据
                 if queue_data[0] == 'audio':
                     audio_dict = queue_data[1]
                 
@@ -242,30 +346,31 @@ class WebSocketClinet:
                         is_end=audio_dict['is_end'],
                         encoding='base64',
                     )
-                    # print(f"send skt time: {datetime.now()}")
+                    
-            # print(f"fnsh skt time: {datetime.now()}")
+            if clear_queue_flag:
+                continue
+            
+            # 等待播放
+            self.listening_event.clear()
             
             # 接收数据
             while True:
                 response, data_type = client.receive_per_data()
                 if data_type == dict:
-                    print(response)  # 打印接收到的消息
+                    print(f"{datetime.now()}: receive json data: {response}")  # 打印接收到的消息
-                    '''
+                    # 误识别情况
-                    try:
+                    if response['code'] == 201:
-                        response = json.loads(response['msg'])
+                        print(f"false audio: wakeup: {self.wakeup_event.is_set()}, interrupt: {self.interrupt_event.is_set()}, listening: {self.listening_event.is_set()}")
-                        if 'content' in response.keys():
-                            self.excute_queue.put((response['instruct'], response['content']))
-                    except json.JSONDecodeError as e:
-                        print(f"json decode error: {e}")
                         continue
-                    # print(f"recv json time: {datetime.now()}")
-                    '''
                 elif data_type == bytes:
-                    # print(f"recv bytes time: {datetime.now()}")
+                    # 开始播放
+                    self.speaking_event.set()
+                    self.listening_event.clear()
+                    print(f"{datetime.now()}: receive audio data")
                     self.audio_play_queue.put(('audio_bytes', response))
                 elif data_type == None:
+                    print(f"{datetime.now()}: receive None data, break loop.")
                     break  # 如果没有接收到消息，则退出循环
-            # print("接收完毕:", datetime.now())
     
     
     def audio_play_process(self):
@@ -276,32 +381,60 @@ class WebSocketClinet:
         '''
         audio_player = AudioPlayer(**self.player_args)
         print("Audio play process started.")
+        audio_list = []
         while True:
             item = self.audio_play_queue.get()
+            
+            # 唤醒状态
+            if not self.wakeup_event.is_set():
+                continue
+            
+            # 打断状态
+            if self.interrupt_event.is_set():
+                self.listening_event.set()
+                self.speaking_event.clear()
+                
+            # 停止播放状态
+            if not self.speaking_event.is_set():
+                assert self.listening_event.is_set(), f"speaking event is not set, got wakeup_event [{self.wakeup_event.is_set()}], interrupt_event [{self.interrupt_event.is_set()}], listening_event [{self.listening_event.is_set()}]"
+                continue
+            
             # 播放音频
-            print("Playing audio...")
+            audio_list.append(item[1])
-            tts_audio = item[1]
+            print(f"{datetime.now()}: start playing audio.")
-            print(f"tts_audio len: {len(tts_audio)}")
-            print(f"play audio time: {datetime.now()}")
             try:
-                # 播放
+                
-                self.speaker_active_set.set()
+                tts_audio = audio_list[0] # 取出第一个音频
                 tts_audio = audio_player.check_audio_type(tts_audio, return_type=None)
                 for i in range(0, len(tts_audio), audio_player.CHUNK):
                     audio_player.stream.write(tts_audio[i:i+audio_player.CHUNK])
                     # print("Playing {} data...{}/{}".format(item[0], i, len(tts_audio)))
-                    if self.mircophone_active_set.is_set():
+                    
-                        print("mirophone is active.")
+                    # 按键打断播放
-                        self.mircophone_active_set.wait()
+                    if self.interrupt_event.is_set():
+                        self.listening_event.set()
+                        self.speaking_event.clear()
                         break
+                    # 关闭状态
+                    if not self.wakeup_event.is_set():
+                        self.listening_event.clear()
+                        self.speaking_event.clear()
+                        break
+                
+                if not self.speaking_event:
+                    print(f"{datetime.now()}: speaker interrupt.")
+                    audio_list = [] # 清空音频列表
+                    continue
+                # 播放最后一段音频
                 audio_player.stream.write(tts_audio[i+audio_player.CHUNK:])
-                print(f"audio data played.")
+                audio_list.pop(0)   # 弹出第一个音频
+                print(f"{datetime.now()}: audio data played.")
             except TypeError as e:
                 print(f"audio play error: {e}")
                 continue
             
-            # audio_player.stream.write(audio_data[i+audio_player.CHUNK:])
+            # 启动监听状态
-            # print(f"{item[0]} data played.")
+            self.listening_event.set()
 
                 
         

tools/keyboard_io.py

@@ -0,0 +1,6 @@
+from takway.board.keyboard import Keyboard
+
+if __name__ == '__main__':
+    kb = Keyboard()
+    while True:
+        pass

ws_client.py

@@ -15,7 +15,7 @@ if __name__ == '__main__':
     # session_id = 'b5923335-a0dd-4d50-b3bf-5ce2a50894ed'
     # session_id = '28445e6d-e8c1-46a6-b980-fbf39b918def' # 鸭
     # session_id = '6e4e7404-c4db-45ac-ba88-b0a483556f66' # 睡 v2
-    session_id = '5a91646f-f70b-4549-9aa3-a9bf270ea371' # 新
+    session_id = '469f4a99-12a5-45a6-bc91-353df07423b6' # 新
     
     
     excute_args = {}
@@ -115,6 +115,7 @@ if __name__ == '__main__':
     parser.add_argument('--IN_frames_per_buffer', type=int, default=512, help='Frames per buffer')
     parser.add_argument('--min_stream_record_time', type=float, default=0.5, help='Min stream record time, sec')
     parser.add_argument('--max_slience_time', type=int, default=30, help='Max slient time when recording, sec')
+    parser.add_argument('--min_act_time', type=float, default=0.5, help='Min inactive time, sec')   # 等待多少秒沉默就发送音频
     parser.add_argument('--mircophone_device', type=int, default=mircophone_device, help='Microphone device index')
     
     # player paramters
@@ -155,6 +156,7 @@ if __name__ == '__main__':
         'FORMAT': pyaudio.paInt16 if args.IN_FORMAT == 16 else pyaudio.paInt32,
         'CHANNELS': args.IN_CHANNELS,
         'RATE': args.IN_RATE,
+        'min_act_time': args.min_act_time,
         'max_slience_time': args.max_slience_time,
         'min_stream_record_time': args.min_stream_record_time,
         'input_device_index': args.mircophone_device,